Fallguy MP3 module
|
ULTRA |
ULTRA +
carrier board |
MINI |
MIGHTY |
MAX |
| Picture (Details may vary) |
 |
 |
 |
 |
 |
| Main characteristics |
Universal embedded audio module for MP3 files |
Universal embedded audio module for MP3 files with extensive interfaces |
Compact embedded audio module for MP3 files |
High end embedded audio module for MP3 files with network interface |
High end embedded audio module for MP3 files with recording interface |
| Memory type |
SD and SDHC flash cards |
Compact flash card type I and II |
| Ejector for flash card |
Integrated |
Not possible |
Optionally available |
| Transfer of MP3 files |
- Through external card reader/writer
- Via the serial interfaces
|
- Through external card reader/writer
- Via RS232/ RS485/ CAN/ LAN (optional)
|
Through external card reader/writer |
- Through external card reader/writer
- Via the network interface
|
- Through external card reader/writer
- Via the recording interface
|
| How can the firmware be changed on existing or installed modules? |
- Using the integrated bootloader: Via the flash card
- Using the integrated bootloader: Via the serial interfaces
|
Using the integrated bootloader: Via the flash card |
| Power supply |
3.3 Volt (mobile or stationary) |
5 Volt (stationary) |
9-12 Volt (stationary; mobile versions also possible after hardware adjustment) |
| Audio interfaces |
- Analog stereo line out for external amplifier
- Digital I2S audio output
|
- Stereo line out for external amplifier
- Stereo headphone output
|
- Stereo line out for external amplifier
- Stereo out for headphones
|
- Stereo line out for external amplifier
|
- Stereo line out for external amplifier
- Stereo line in
- Stereo out for headphones possible
- Input for microphone possible
|
| Control interfaces |
- 8 button or analog inputs for connecting buttons, sensors or relais
- 10 digital in- and outputs
- 1 asynchronous serial interface with 115.200 bps for RS232 or RS485 connections with hardware handshake
- 1 asynchronous serial interface with 921.600 bps for LAN connections with hardware handshake
- 1 CAN interface
- 1 connection for a LC-Display
- 5 connections for additional LEDs
|
- 5 button or analog inputs for connecting buttons, sensors or relais with ESD protection
- 8 digital in- and outputs
- 1 connection for a matrix keyboard (max. 6x4 - 24 buttons)
- 1 LAN interface (optional)
- 1 RS232 interface (115.200 bps)
- 1 RS485 interface (115.200 bps)
- 1 CAN interface (optional)
- 1 connection for a LC-Display
- 1 connection for 5 external status LEDs
- 2 audio cinch plugs (Left/Right)
- 1 headphone jack plug (stereo)
|
- 6 button inputs
- 2 analog or digital inputs
- 8 digital in- and outputs
- 1 asynchronous serial interface (TTL level)
|
- 6 button inputs
- 2 analog or digital inputs
- 8 digital in- and outputs
- 1 asynchronous serial interface (TTL level)
- 1 network interface (LAN)
|
- 6 button inputs
- 2 analog or digital inputs
- 8 digital in- and outputs
- 1 asynchronous serial interface (TTL level)
|
| Features of the standard firmware |
- Controlling via 8 buttons
- Controlling via the matrix keyboard
- Controlling via the digital inputs
- Controlling via 3 serial interfaces and extensive command set
- Output of status messages via a LC-Display
- Output of track indicators via LEDs
- Setup the module via optional configuration file
- Save configuration data into internal EEPROM
|
- Controlling via 8 buttons
- Controlling via the matrix keyboard
- Controlling via the digital inputs
- Controlling via the LAN/ RS232/ RS485/ CAN interfaces and extensive command set
- Output of status messages via a LC-Display
- Output of track indicators via LEDs
- Setup the module via optional configuration file
- Save configuration data into internal EEPROM
|
- Controlling via 6 buttons
- Controlling via matrix keyboard
- Controlling via serial interface and extensive command set
- Output of status messages via a LC-Display
- Setup the module via optional configuration file
|
- Controlling via 6 buttons
- Controlling via LAN or serial interface and extensive command set
- Setup the module via optional configuration file
- Save configuration data into internal EEPROM
|
- Controlling via 6 buttons
- Controlling via serial interface and extensive command set
- Save configuration data into internal EEPROM
|
| Visual elements |
- |
- 3 front buttons
- 4 status LEDs
|
- |
| Casing kit available |
- |
Yes |
- |
| Delivery time, availability |
From 1 unit within 2-3 days |
Not available as standard module; only as customer specific version |
